HOME Football Drills Crossing and Finishing

Football: Crossing and finishing

Very good interactive coaching drills.

Matt

DESCRIPTION

Set up:

3 Attacking players from each team on each side of one half, taking it in turns.

If you have 2 GKs then have a GK for each team

Attacking players A1, A2 and A3 positioned as shown in diagram.

Description:

A1 passes to A3, and runs towards the penalty area.

A2 runs behind A3 to the upper right corner of the field to be passed the ball.

A3 then also runs into the penalty area.

Out of the 2 strikers running in, the first person who gets to the box is the one who takes the front post. This will usually be A1 as they started running in first. Therefore A3 takes the back post.

A2 crosses in and A1/A3 finishes.

The opposition have the same set up the other side and they go while the other team is setting up again.

Swap the GK for the opposition

Having 2 teams makes the drill competitve

The teams switch sides after 10 crosses.

After 10 crosses each on each side the team who gets the most goals wins and you can make the other team do a forfeit. (For example a high intensity run)

COACHING POINTS

Concentrate on the type of run from 2 strikers. Angle of approach of run. Speed of approach and timing of run.

Strikers making the correct decision when striking at goal. Can they use the pace of the cross to guide the ball into the goal. Do they need to have good first touch before striking at goal?

Type of crossing options:

Quick cross across face of the goal for strikers to attack
Back post could "pull back" to the penalty spot
If crossing player is next to the byline then they might chip the ball up to the striker by the back post.

The crossing player needs to recognise their position and the position of the strikers in making their decision for the type of cross.

READ MORE

READ LESS

OFTEN USED WITH...

Crossing and Finishing Drill:

Position 5 Attacking players as shown on the diagram and a GK in the goal.

Pass 1 --> 2 --> 3 --> 4 --> 5; with 5 running round from behind 4 to collect the pass. Have a mannequin set up either side of player 4.

After a player has made a pass they will move into the starting position of the person they have passed to. Form a line of players ready to make it a continuous drill.

This should be repeated on each side.

Crossing and Finishing

1-2 and cross:

Set up as shown.

Player 1 starts with the ball in the middle of the field and plays a 1-2 pass with player 2 before passing out wide to player 3.

At this point, players 1 and 2 run towards the penalty area, ready to receive a cross, while one of the defenders goes out wide to put pressure on the crosser.

Player 3 will cross the ball into the box where players 1 and 2 will try to beat the defender to it and score.

Crossing and Finishing

Break football:

2 players outside the area play a ball into one of their players in the grid.

The 2 players in the grid play 2 v 4 to try and score a goal on the half way line by dribbling the balll through the gate.

The 4 players try to win the ball and when they do they have to break as quick as they can and try to score a goal.

the only 2 defenders that can stop them are the 2 defenders out side the grid. (Blue dot players)

Crossing and Finishing

2 Player Crossing Drill:

Players on the wing run with the ball down the side of the pitch before crossing for an attacker who has ran into the area, usually at the far post.

Attackers begin further back than the wingers and in line with the corner of the penalty area. Once the coach blows his whistle, the attacker must sprint at full speed to reach the area and get on the end of the cross.

Crossing and Finishing

1938101

1011